Guide · Equipment

How many hours a week must a new machine run to pay for itself?

A break-even hours formula for any machine, a worked example with the cash ramp, and the one comparison most owners skip: buying versus outsourcing.

Updated 17 November 2026 · Business Boosters editorial team

See if you qualify →No credit check to enquire
Barista working behind a cafe counter next to a commercial espresso machine and grinders

Quick answer

A new machine pays for itself when it runs enough hours each month for its contribution to cover its fixed costs. Divide the monthly repayments, insurance and servicing by the profit each machine hour earns after materials and operator time. The result, divided by about 4.33, is your break-even hours a week. Then check that number against work you actually have on the books.

Key points

  • Break-even hours a month = monthly fixed costs of the machine ÷ contribution per machine hour (price less materials and operator cost).
  • Divide by 4.33 for hours a week, then compare with the hours of paid work you can already see, not the hours you hope for.
  • No machine runs 100% of the time. Set-ups, servicing and gaps mean 65% to 75% of available hours is a realistic ceiling.
  • Hours that replace outsourcing only earn the saving. Hours of brand-new work earn the full contribution. Count them separately.
  • The $20,000 instant asset write-off is permanent from 1 July 2026 but applies per asset under that price, so it won't change the maths on a $96,000 machine.
  • Size any borrowing to the deepest point of the ramp-up, not to the whole machine, and check the total cost of finance in dollars.

A new machine pays for itself when it runs enough hours each month for what it earns to cover what it costs to own. Divide the machine’s monthly fixed costs by the profit one machine hour earns after materials and operator time. That’s your break-even hours. If you can already see more work than that, the machine is on the launch pad. If you can’t, wait.

Most machine quotes stop at “it will pay for itself in two years”. Two years of what? The only honest answer is hours. Here’s how to find the number.

How many hours a week does a machine need to run to break even?

Break-even hours a month equal the machine’s fixed monthly costs divided by the contribution each machine hour earns. Divide by 4.33 (average weeks in a month) to get hours a week. It’s one line of maths, and it turns a vague hope into a target you can check against your diary.

Break-even hours a month = fixed monthly costs ÷ contribution per machine hour

Fixed costs are what you pay whether the machine runs or not:

  • repayments, or the monthly cost of the finance, in dollars;
  • insurance;
  • servicing and a maintenance allowance;
  • extra floor space, power or software licences if the machine needs them.

Contribution per machine hour is the money one hour of running the machine brings in, less what that hour uses up:

  • what you charge for the output of that hour;
  • minus materials and consumables;
  • minus the operator’s loaded cost for that hour (wages, super, workers compensation).

If your gross margin already nets off materials, our gross margin and growth page shows how to get a clean per-job figure first. A margin built on revenue alone will flatter the machine.

What does the contribution per hour look like at different margins?

The thinner the contribution, the more hours you need. Here is the same $2,400 of monthly fixed costs spread across three levels of contribution (illustrative figures):

Contribution per machine hour Break-even hours a month Break-even hours a week
$30 80 18.5
$42 57 13.2
$60 40 9.2

A $12 lift in what each hour earns cuts the weekly target by five hours. Before you buy, test whether you can charge more for the machine’s output, buy materials better or cut set-up time. Those moves often matter more than haggling over the price of the machine.

A worked example (illustrative)

A joinery workshop is weighing up a $96,000 CNC router. The plan is to finance it over five years, with total repayments of $114,000 (that is $1,900 a month, and $18,000 is the total cost of finance in dollars). The monthly cost of ownership:

Fixed cost Per month
Repayments $1,900
Insurance $200
Servicing allowance $300
Total fixed $2,400

Each machine hour is sold at $120 of output. Materials and consumables take $36, and the operator costs $42 an hour all-in. That leaves a contribution of $120 − $36 − $42 = $42 an hour.

  • Break-even: $2,400 ÷ $42 = about 57 hours a month, or 13.2 hours a week.
  • Against capacity: one shift of 38 hours a week gives about 164 machine hours a month. Break-even uses roughly 35% of that.
  • Realistic ceiling: at 70% utilisation (about 115 hours) the machine earns $115 × $42 = $4,830, less $2,400, which is $2,430 a month of profit.

That looks promising. But the owner’s order book shows only about 70 hours a month of work the machine would do, so the ramp-up matters:

Month Machine hours Contribution Monthly result (after $2,400) Running total
1 20 $840 –$1,560 –$1,560
2 40 $1,680 –$720 –$2,280
3 55 $2,310 –$90 –$2,370
4 70 $2,940 +$540 –$1,830
5 70 $2,940 +$540 –$1,290
6 70 $2,940 +$540 –$750
7 70 $2,940 +$540 –$210
8 70 $2,940 +$540 +$330

The deepest point is –$2,370 in month three, and the running total turns positive in month eight. So the real funding need here is a few thousand dollars of buffer, not $96,000 of wishful thinking. Run your own version through the Growth ROI calculator with a slower ramp as well, because installation, training and early rework will push month one lower than most owners plan.

If the order book never grows beyond 70 hours, this machine makes about $540 a month on a $96,000 purchase. That’s a weak return, and it’s better to find it out on a spreadsheet than from the bank statement.

Should you buy the machine or keep outsourcing?

Buying beats outsourcing only on the margin the machine adds over what outsourcing already earns you. The right comparison is the next-best option, not “do nothing”. Count hours that replace outsourcing at the saving, and hours of brand-new work at the full contribution.

Suppose the workshop currently outsources routing and earns $25 an hour on those jobs after paying the supplier. Owning gives $42, so each outsourced hour brought in-house gains only $17. New work the shop turns away today gains the full $42.

Source of machine hours Hours a month Gain per hour Monthly gain
Replaces outsourced jobs 40 $17 $680
Brand-new work 45 $42 $1,890
Total 85 $2,570

Against $2,400 of fixed costs, that leaves $170 a month. The machine technically pays for itself but barely earns its keep. If all the hours were outsourced work, you’d need $2,400 ÷ $17 = about 141 hours a month (32.6 a week) before owning wins, which is a very high bar. The machine really earns when it opens doors: new customers, faster turnaround or products you can’t make today.

Which costs do owners forget in machine payback?

Owners most often forget the operator, set-up time, downtime and the cost of the ramp-up. Each shrinks real contribution or stretches the payback. Add these before you trust a break-even figure:

  • Operator time. If the machine needs someone who is already busy, their hours aren’t free. Our new hire break-even method covers the case where it needs a new person.
  • Set-ups and changeovers. A job that takes 20 minutes of machine time but 40 minutes of set-up has a contribution about a third of what the sheet says.
  • Downtime. Servicing and breakdowns are why 65% to 75% is a sensible utilisation ceiling, not 100%.
  • Training and early scrap. Month one is almost never your cheapest month.
  • Tax timing. The ATO describes the $20,000 instant asset write-off as permanent from 1 July 2026 for small businesses with aggregated turnover under $10 million, applied per asset. It’s useful for smaller kit. It doesn’t alter hours or contribution, so keep it out of the break-even test and ask your accountant how it affects your tax.

Our equipment for growth playbook and the technology and automation finance page go deeper on choosing between kit.

When should you borrow to buy the machine, and when should you wait?

Borrow when break-even hours sit comfortably below the work already booked, and the shortfall to fund is the ramp-up rather than a gap in demand. Wait when the order book is thin, because repayments start on day one and the work might not.

Run three checks first:

  1. Order-book test. Are the break-even hours covered by quotes accepted, repeat customers or outsourced work you can bring in-house?
  2. Low-case test. If hours come in at 70% of plan, does the machine still cover its fixed costs? Our stress test your growth plan page shows how.
  3. Payback test. Does the month the running total turns positive, plus the total cost of finance, sit inside the machine’s useful life? The payback period page explains how to read it.

If the answers are yes, a funded machine can be the quickest route from a full diary to more profit. And if you’d like a second pair of eyes on whether your numbers fit a funding option, the enquiry takes about a minute.

Ready to put the machine to work? Let’s check your options

A machine that earns its hours is one of the most satisfying purchases a growing business can make. If your break-even hours sit well under the work you can see, the next step is lining up funding that suits the machine and its ramp-up.

Enquiring takes about 60 seconds, and there is no credit check when you enquire, so your credit file stays untouched just for asking. We don’t hand your details to a pile of lenders, so your phone stays quiet. A real person on our team reads your numbers, thinks about the machine and its payback, and calls you. Please fill the form in accurately: the more honest the detail, the better the chance we match the right option first time.

Check your funding options →

Ready when you are

Check your options in about 60 seconds

A few quick questions. Asking won't touch your credit file, your details aren't sent to a pile of lenders, and a real person reads every enquiry.

Frequently asked questions

How do I work out how many hours a week a machine needs to run to pay for itself?

Add up the machine's monthly fixed costs: repayments, insurance, servicing and any extra floor space. Work out what one machine hour earns after materials, consumables and operator time. Divide the first number by the second to get hours a month, then divide by 4.33 for hours a week. In the worked example, $2,400 of monthly costs and $42 earned per hour gives about 57 hours a month, or 13 hours a week.

What is a good utilisation rate for a new machine?

There's no single figure, because it depends on whether the machine runs one shift or several and how long set-ups take. As a planning rule, treat 65% to 75% of the hours the machine is available as a realistic ceiling, since changeovers, maintenance and gaps between jobs eat the rest. If your break-even sits above that ceiling, the purchase is risky.

Should I buy a machine or keep outsourcing the work?

Compare the machine's contribution per hour with what you earn on outsourced work today. If outsourcing already leaves you $25 an hour and owning would leave $42, the machine only gains you $17 an hour on those jobs. Spread $2,400 of fixed costs over $17 and you need about 141 hours a month before owning beats outsourcing, unless the machine also unlocks new work you can't take on today.

Does the instant asset write-off make a machine pay for itself sooner?

It can help your tax, but it doesn't change break-even hours. The ATO describes the $20,000 instant asset write-off as permanent from 1 July 2026 for small businesses with aggregated turnover under $10 million, applied per asset. A machine over that price is depreciated instead. Ask your accountant how it affects your after-tax cash.

How much should I borrow to buy a new machine?

The machine price isn't always the right figure. Model the monthly result for each month of the ramp-up and find the lowest point of the running total. Unsecured and line-of-credit options typically run from $20,000 to $500,000, while property-secured loans run from $20,000 to $5,000,000. Choose the structure that suits the size and life of the machine, and check the total cost of finance in dollars before you commit.

What if my break-even hours are higher than the work I can see?

Then pause or shrink the plan. Options include a cheaper or used machine, a smaller model, hiring time on someone else's machine for another quarter, or signing up two or three regular customers before you buy. Buying early and hoping the work turns up is how repayments end up on the owner's shoulders.

See what your business could qualify for

One short enquiry, no credit check when you first enquire, and a real person who calls you back with options that fit.

No credit check to enquire

No spray-and-pray

A real person on your plan